Show simple item record

dc.contributor.authorTotake, Yukitsugu
dc.contributor.authorButler, Rob W. H.
dc.contributor.authorBond, Clare E.
dc.date.accessioned2017-12-12T00:01:47Z
dc.date.available2017-12-12T00:01:47Z
dc.date.issued2017-02
dc.identifier.citationTotake , Y , Butler , R W H & Bond , C E 2017 , ' Structural validation as an input into seismic depth conversion to decrease assigned structural uncertainty ' Journal of Structural Geology , vol. 95 , pp. 32-47 . https://doi.org/10.1016/j.jsg.2016.12.007en
dc.identifier.issn0191-8141
dc.identifier.otherPURE: 78503234
dc.identifier.otherPURE UUID: c4d192ff-06aa-41cc-9e31-e7fb789e2bce
dc.identifier.otherScopus: 85006307136
dc.identifier.urihttp://hdl.handle.net/2164/9761
dc.descriptionThis study is based on PhD research project funded by INPEX CORPORATION at University of Aberdeen. Seismic images for this study were taken from the Higgins et al. (2009), through the courtesy of CGG (formerly CGG Veritas). Further examples are available through the Virtual Seismic Atlas (www.seismicatlas.org). Restoration and forward modelling and measurements for the area-depth-strain analysis were performed in Move 2016.1 by Midland Valley made available through academic partnership. Trishear inverse modelling was programmed referring to MATLAB scripts publicized on Allmendinger et al. (2012, chapter 11) and Nester Cardozo's website (http://www.ux.uis.no/∼nestor/work/programs.html) and implemented in MATLAB 2015b. Finally we thank Nester Cardozo and Richard Groshong for valuable comments that significantly improved this contribution.en
dc.format.extent16en
dc.language.isoeng
dc.relation.ispartofJournal of Structural Geologyen
dc.rights© 2016. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/en
dc.subjectstructural validationen
dc.subjectseismic interpretationen
dc.subjectuncertaintyen
dc.subjectdepth conversionen
dc.subjectfold-thrust structuresen
dc.subjectQE Geologyen
dc.subject.lccQEen
dc.titleStructural validation as an input into seismic depth conversion to decrease assigned structural uncertaintyen
dc.typeJournal articleen
dc.contributor.institutionUniversity of Aberdeen, Geosciencesen
dc.contributor.institutionUniversity of Aberdeen, Geology & Petroleum Geologyen
dc.contributor.institutionUniversity of Aberdeen, Energyen
dc.contributor.institutionUniversity of Aberdeen, Aberdeen Institute of Energyen
dc.description.statusPeer revieweden
dc.description.versionPostprinten
dc.identifier.doihttps://doi.org/10.1016/j.jsg.2016.12.007
dc.date.embargoedUntil11-12-20


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record