Browsing by Author "Kartal, Mehmet"
Now showing 1 - 11 of 11
- Results Per Page
- Sort Options
Item Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography : influence of processing parameters and heat treatment(2020-05-01) Hastie, James C; Kartal, Mehmet; Carter, Luke N; Attallah, Moataz M; Mulvihill, Daniel M; University of Aberdeen.Engineering; University of Aberdeen.EngineeringItem Crystal plasticity based constitutive model for deformation in metastable β titanium alloys(2024-07-01) Christie, Peter; Siddiq, M.A.; Asim, U.B.; McMeeking, R.M.; Kartal, Mehmet; University of Aberdeen.Engineering; University of Aberdeen.National Decommissioning Centre; University of Aberdeen.Engineering; University of Aberdeen.Centre for Micro- and Nanomechanics (CEMINACS)Item Deformation of AlSi10Mg parts manufactured by Laser Powder Bed Fusion : In-situ measurements incorporating X-ray micro computed tomography and a micro testing stage(2022-01-08) Koelblin, Joachim; Hastie, James; Kartal, Mehmet; Siddiq, Amir; Attallah, Moataz M; University of Aberdeen.Engineering; University of Aberdeen.EngineeringItem Enhancing strength and toughness of adhesive joints via micro-structured mechanical interlocking(2021-03-01) Hamilton, Alexander; Xu, Yang; Kartal, Mehmet; Gadegaard, Nikolaj; Mulvihill, Daniel M; University of Aberdeen.EngineeringItem Evolution of internal pores within AlSi10Mg manufactured by laser powder bed fusion under tension : As-built and heat treated conditions(2021-06-01) Hastie, James C; Koelblin, Joachim; Kartal, Mehmet; Attallah, Moataz M; Martinez, Rafael; University of Aberdeen.Engineering; University of Aberdeen.EngineeringItem The Influence of Post-Thermal Treatments on Microstructure and Mechanical Properties in A20X Alloy Fabricated through Powder Bed Fusion(2024-09-15) Koelblin, Joachim; Cruchley, Nick; Chamberlin, Joseph; Siddiq, Amir; Mulvihill, Daniel M; Kartal, Mehmet; University of Aberdeen.National Decommissioning Centre; University of Aberdeen.EngineeringItem Interaction of defects, martensitic transformation and slip in metastable body centred cubic crystals of Ti-10V-2Fe-3Al : A study via crystal plasticity finite element methods (CPFEM)(2025-01) Christie, Peter; Siddiq, Amir; McMeeking, Robert; Kartal, Mehmet; University of Aberdeen.National Decommissioning Centre; University of Aberdeen.Engineering; University of Aberdeen.Centre for Micro- and Nanomechanics (CEMINACS)Item Investigation of Novel Post-Thermal Treatments of Alloy 718 Fabricated by Modulated Laser Powder Bed Fusion(2022-08-01) Georgilas, Konstantinos; Sergi, Alessandro; Khan, Raja H.U.; Kartal, Mehmet; University of Aberdeen.EngineeringItem A Multiscale Constitutive Model for Metal Forming of Dual Phase Titanium Alloys by Incorporating Inherent Deformation and Failure Mechanisms(2022-03) Asim, Umair Bin; Siddiq, M. Amir; McMeeking, Robert; Kartal, Mehmet; University of Aberdeen.Engineering; University of Aberdeen.Centre for Micro- and Nanomechanics (CEMINACS)Item Residual Stresses in Alloy IN718 Produced through Modulated Laser Powder Bed Fusion(2023-12) Georgilas, Konstantinos; Guo, Hua; Ahmad, Bilal; Khan, Raja H.U.; Fitzpatrick, Michael E.; Kartal, Mehmet; University of Aberdeen.EngineeringItem Tailorable and Repeatable Normal Contact Stiffness via Micropatterned Interfaces(2021) Perris, Jack; Xu, Yang; Kartal, Mehmet; Gadegaard, Nikolaj; Mulvihill, Daniel M; University of Aberdeen.Engineering