Show simple item record

dc.contributor.authorIbekwe, Anelechi
dc.contributor.authorTanino, Yukie
dc.contributor.authorPokrajac, Dubravka
dc.date.accessioned2019-10-01T07:40:05Z
dc.date.available2019-10-01T07:40:05Z
dc.date.issued2019-12
dc.identifier.citationIbekwe , A , Tanino , Y & Pokrajac , D 2019 , ' A low-cost, non-hazardous protocol for surface texturing of glass particles ' , Tribology Letters , vol. 67 , no. 4 , 115 . https://doi.org/10.1007/s11249-019-1230-3en
dc.identifier.issn1023-8883
dc.identifier.otherPURE: 147690955
dc.identifier.otherPURE UUID: 0cfd42dd-697f-405c-ae51-d9a9b008d240
dc.identifier.otherORCID: /0000-0002-5766-0515/work/63244163
dc.identifier.otherScopus: 85073069455
dc.identifier.otherWOS: 000491967000002
dc.identifier.urihttp://hdl.handle.net/2164/13040
dc.descriptionAcknowledgements This material contains work supported by an Aberdeen Formation Evaluation Society student bursary and a Society of Petrophysicists and Well Log Analysts Foundation grant. AI was supported by a University of Aberdeen School of Engineering Elphinstone Ph.D. studentship. Electron microscopy was performed in the ACEMAC Facility at University of Aberdeen; the authors thank John Still for the acquisition of the SEM images. The authors gratefully acknowledge Alfred R. Akisanya and Mark Gourlay for helpful suggestions on the texturing protocol. The authors thank the anonymous reviewer for his/her comments. All data used in this study are available from the corresponding author on reasonable request.en
dc.format.extent6
dc.language.isoeng
dc.relation.ispartofTribology Lettersen
dc.rights© The Author(s) 2019 This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.en
dc.subjectsurface roughnessen
dc.subjectSEMen
dc.subjectabrasive wearen
dc.subjectglassen
dc.subjectpolishingen
dc.subjectpermeabilityen
dc.subjectsurface metrologyen
dc.subjectcorrelation lengthen
dc.subjectWETTABILITYen
dc.subjectSOLID-SURFACESen
dc.subjectGlassen
dc.subjectSIZEen
dc.subjectPolishingen
dc.subjectSurface roughnessen
dc.subjectPermeabilityen
dc.subjectSurface metrologyen
dc.subjectROUGHNESSen
dc.subjectFLOWen
dc.subjectIMPACTen
dc.subjectAbrasive wearen
dc.subjectCONTACT ANGLESen
dc.subjectCorrelation lengthen
dc.subjectTA Engineering (General). Civil engineering (General)en
dc.subject.lccTAen
dc.titleA low-cost, non-hazardous protocol for surface texturing of glass particlesen
dc.typeJournal articleen
dc.contributor.institutionUniversity of Aberdeen.Engineeringen
dc.contributor.institutionUniversity of Aberdeen.Engineeringen
dc.contributor.institutionUniversity of Aberdeen.Energyen
dc.contributor.institutionUniversity of Aberdeen.Engineering (Research Theme)en
dc.description.statusPeer revieweden
dc.description.versionPublisher PDFen
dc.identifier.doihttps://doi.org/10.1007/s11249-019-1230-3


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record