dc.contributor.author | Hastie, James C | |
dc.contributor.author | Kartal, Mehmet | |
dc.contributor.author | Carter, Luke N | |
dc.contributor.author | Attallah, Moataz M | |
dc.contributor.author | Mulvihill, Daniel M | |
dc.date.accessioned | 2021-02-28T00:12:28Z | |
dc.date.available | 2021-02-28T00:12:28Z | |
dc.date.issued | 2020-05-01 | |
dc.identifier.citation | Hastie , J C , Kartal , M , Carter , L N , Attallah , M M & Mulvihill , D M 2020 , ' Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography : influence of processing parameters and heat treatment ' , Materials Characterization , vol. 163 , 110225 . https://doi.org/10.1016/j.matchar.2020.110225 | en |
dc.identifier.issn | 1044-5803 | |
dc.identifier.other | PURE: 157859208 | |
dc.identifier.other | PURE UUID: f4d29ea5-2701-487a-8fb3-76989eee7f53 | |
dc.identifier.other | Scopus: 85080975585 | |
dc.identifier.other | WOS: 000551341700024 | |
dc.identifier.other | unpaywall: 10.1016/j.matchar.2020.110225 | |
dc.identifier.uri | https://hdl.handle.net/2164/15939 | |
dc.description | The authors gratefully acknowledge the support provided by the EPSRC (grant EP/R021694/1). The authors also wish to thank Rosie Bird at the University of Aberdeen for assisting with Avizo. | en |
dc.format.extent | 14 | |
dc.language.iso | eng | |
dc.relation.ispartof | Materials Characterization | en |
dc.rights | © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ | en |
dc.subject | laser powder bed fusion | en |
dc.subject | selective laser melting | en |
dc.subject | X-ray micro computed tomography | en |
dc.subject | porosity classification | en |
dc.subject | hot isostatic pressing | en |
dc.subject | T6 heat treatment | en |
dc.subject | POROSITY | en |
dc.subject | Laser powder bed fusion | en |
dc.subject | QUANTIFICATION | en |
dc.subject | Hot isostatic pressing | en |
dc.subject | Porosity classification | en |
dc.subject | MECHANICAL-PROPERTIES | en |
dc.subject | Selective laser melting | en |
dc.subject | MELTED ALSI10MG | en |
dc.subject | MICROSTRUCTURE | en |
dc.subject | TA Engineering (General). Civil engineering (General) | en |
dc.subject | Condensed Matter Physics | en |
dc.subject | Mechanics of Materials | en |
dc.subject | Mechanical Engineering | en |
dc.subject | Materials Science(all) | en |
dc.subject | Engineering and Physical Sciences Research Council (EPSRC) | en |
dc.subject | EP/R021694/1 | en |
dc.subject.lcc | TA | en |
dc.title | Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography : influence of processing parameters and heat treatment | en |
dc.type | Journal article | en |
dc.contributor.institution | University of Aberdeen.Engineering | en |
dc.contributor.institution | University of Aberdeen.Engineering | en |
dc.description.status | Peer reviewed | en |
dc.description.version | Postprint | en |
dc.identifier.doi | https://doi.org/10.1016/j.matchar.2020.110225 | |
dc.date.embargoedUntil | 2021-02-28 | |
dc.identifier.url | http://www.scopus.com/inward/record.url?scp=85080975585&partnerID=8YFLogxK | en |
dc.identifier.vol | 163 | en |