Orthogonal cutting process modelling considering tool-workpiece frictional effect
| dc.contributor.author | Rusinek, Rafal | |
| dc.contributor.author | Wiercigroch, Marian | |
| dc.contributor.author | Wahi, Pankaj | |
| dc.contributor.institution | University of Aberdeen.Engineering | en |
| dc.contributor.institution | University of Aberdeen.Energy | en |
| dc.contributor.institution | University of Aberdeen.Centre for Applied Dynamics Research (CADR) | en |
| dc.date.accessioned | 2017-01-31T18:28:16Z | |
| dc.date.available | 2017-01-31T18:28:16Z | |
| dc.date.issued | 2015 | |
| dc.description | 15th CIRP Conference on Modelling of Machining Operations (15th CMMO) Acknowledgements Financial support of Structural Funds in the Operational Programme - Innovative Economy (IE OP) financed from the European Regional Development Fund - Project ”Modern material technologies in aerospace industry”, POIG.01.01.02-00-015/08-00 is gratefully acknowledged | en |
| dc.description.status | Peer reviewed | en |
| dc.format.extent | 6 | |
| dc.format.extent | 372136 | |
| dc.identifier | 72624780 | |
| dc.identifier | edd18317-6edf-4bc5-a955-6702a12bfbaa | |
| dc.identifier | 84939122822 | |
| dc.identifier.citation | Rusinek, R, Wiercigroch, M & Wahi, P 2015, 'Orthogonal cutting process modelling considering tool-workpiece frictional effect', Procedia CIRP, vol. 31, pp. 429-434. https://doi.org/10.1016/j.procir.2015.03.033 | en |
| dc.identifier.doi | 10.1016/j.procir.2015.03.033 | |
| dc.identifier.uri | http://hdl.handle.net/2164/8097 | |
| dc.identifier.url | http://www.scopus.com/inward/record.url?scp=84939122822&partnerID=8YFLogxK | en |
| dc.identifier.vol | 31 | en |
| dc.language.iso | eng | |
| dc.relation.ispartof | Procedia CIRP | en |
| dc.subject | Chatter | en |
| dc.subject | Cutting process dynamics | en |
| dc.subject | Friction | en |
| dc.subject | Tool flank forces | en |
| dc.subject | TA Engineering (General). Civil engineering (General) | en |
| dc.subject | Control and Systems Engineering | en |
| dc.subject | Industrial and Manufacturing Engineering | en |
| dc.subject.lcc | TA | en |
| dc.title | Orthogonal cutting process modelling considering tool-workpiece frictional effect | en |
| dc.type | Journal article | en |