Ibekwe, AnelechiTanino, YukiePokrajac, Dubravka2019-10-012019-10-012019-12Ibekwe, A, Tanino, Y & Pokrajac, D 2019, 'A low-cost, non-hazardous protocol for surface texturing of glass particles', Tribology Letters, vol. 67, no. 4, 115. https://doi.org/10.1007/s11249-019-1230-31023-8883ORCID: /0000-0002-5766-0515/work/63244163http://hdl.handle.net/2164/13040Acknowledgements This material contains work supported by an Aberdeen Formation Evaluation Society student bursary and a Society of Petrophysicists and Well Log Analysts Foundation grant. AI was supported by a University of Aberdeen School of Engineering Elphinstone Ph.D. studentship. Electron microscopy was performed in the ACEMAC Facility at University of Aberdeen; the authors thank John Still for the acquisition of the SEM images. The authors gratefully acknowledge Alfred R. Akisanya and Mark Gourlay for helpful suggestions on the texturing protocol. The authors thank the anonymous reviewer for his/her comments. All data used in this study are available from the corresponding author on reasonable request.61042908engsurface roughnessSEMabrasive wearglasspolishingpermeabilitysurface metrologycorrelation lengthWETTABILITYSOLID-SURFACESGlassSIZEPolishingSurface roughnessPermeabilitySurface metrologyROUGHNESSFLOWIMPACTAbrasive wearCONTACT ANGLESCorrelation lengthTA Engineering (General). Civil engineering (General)TAJournal article10.1007/s11249-019-1230-3674