Van Der Zanden, JoepVan der A, Dominic AlexanderHurther, DavidCaceres, IvanO'Donoghue, ThomasHulscher, Suzanne J.M.H.Ribberink, Jan S.2018-09-192018-09-192017-11Van Der Zanden, J, Van der A, D A, Hurther, D, Caceres, I, O'Donoghue, T, Hulscher, S J M H & Ribberink, J S 2017, 'Bedload and suspended load contributions to breaker bar morphodynamics', Coastal Engineering, vol. 129, pp. 74-92. https://doi.org/10.1016/j.coastaleng.2017.09.0050378-3839http://hdl.handle.net/2164/11132The authors wish to thank the staff of CIEMLAB, in particular Joaquim Sospedra, Oscar Galego and Ricardo Torres, for their hospitality and hard work during the experimental campaign. We thank Sjoerd van Til for his contributions to the grain size analysis. The authors are also grateful to fellow SINBAD researchers for their feedback on preliminary results and to two anonymous reviewers for their constructive feedback on the draft manuscript. The research presented in this paper is part of the SINBAD project, funded by STW (12058) and EPSRC (EP/J00507X/1, EP/J005541/1). We further acknowledge the European Community’s FP7 project Hydralab IV (contract no. 261520) for funding the accompanying SandT-Pro experiments.191587466engBreaking wavesheet flowmorphodynamicsgrain size sortingBedload transportbreaker barTA Engineering (General). Civil engineering (General)Engineering and Physical Sciences Research Council (EPSRC)EP/J00507X/1EP/J005541/1European Commission261520TAJournal article10.1016/j.coastaleng.2017.09.005129